Water-Driven Micromotors Rocket Around Chemical & Engineering News
Nanodevices: Particles that use water instead of hydrogen peroxide as fuel could find use in biosensor devices.
Over the past several years, bioengineers have built micro- and nanosized rockets that zip through liquids, fueled by chemical reactions between the materials that make up the rockets and their environments. The engineers hope someday these tiny motors could help deliver cargo, such as drugs. Unfortunately, many of these motors require toxic hydrogen peroxide as fuel source, limiting their use in the body. Now researchers have overcome this constraint by developing micromotors that run on water (ACS Nano, DOI: 10.1021/nn303309z).
The particles, which are 20 µm in diameter, are asymmetric: A chemical reaction on the back side of the particle forms gas bubbles that propel the motor forward. The micromotors harness a well-known reaction between aluminum and water to produce hydrogen gas and aluminum hydroxide.
Joseph Wang of the University of California, San Diego, and his team made the particles out of an aluminum-gallium alloy. The gallium prevents a film of aluminum hydroxide from forming on the particle during the reaction. Without gallium, the film would stop the reaction by coating the aluminum surface, says Wang.
Hydrogen bubbles speed micromotors (dark sphere) through sodium chloride solutions. The numbers at the bottom right (blue) are the salt concentrations. The motors are 20 µm in diameter.
Credit: ACS Nano
To make the motors, the researchers added liquid gallium to aluminum particles to form the alloy. They then coated one side of the particle with titanium, making that face inert while the other face remained reactive in water.
They found that their motors can dash off at a speed of 3 mm per second in water. In other aqueous solutions, such as salt solutions, cell growth media, and human blood serum, the particles move more slowly.
Wang cautions that applications, such as drug delivery, are a long way off. One of the hurdles he must leap is that his motors don’t last long because the reaction isn’t catalytic. As the aluminum reacts with water, the particles dissolve after about a minute. In salt solutions, the slower reaction increases the lifetime to almost five minutes. Wang says his team is investigating other alloys and reactions that could last longer.
Other materials and alloys might solve another problem: toxicity. As the water-fueled particles break down, they release aluminum and gallium, which could harm cells. Zinc is a less toxic motor material. Wang and his colleagues recently reported motors made with zinc that use acid as fuel (J. Am. Chem. Soc., DOI: 10.1021/ja210874s).
Despite their limitations, the water-fueled motors tackle a major problem bioengineers have been struggling to solve, says Samuel Sanchez of the Leibniz Institute for Solid State and Materials Research, in Dresden, Germany. He thinks researchers could use the motors in biosensor devices that require transporting DNA or cells.
Chemical & Engineering News
ISSN 0009-2347
Copyright © 2012 American Chemical Society
Joseph Wang of the University of California, San Diego, and his team made the particles out of an aluminum-gallium alloy. The gallium prevents a film of aluminum hydroxide from forming on the particle during the reaction. Without gallium, the film would stop the reaction by coating the aluminum surface, says Wang.
Micromotor in Action
Hydrogen bubbles speed micromotors (dark sphere) through sodium chloride solutions. The numbers at the bottom right (blue) are the salt concentrations. The motors are 20 µm in diameter.
Credit: ACS Nano
To make the motors, the researchers added liquid gallium to aluminum particles to form the alloy. They then coated one side of the particle with titanium, making that face inert while the other face remained reactive in water.
They found that their motors can dash off at a speed of 3 mm per second in water. In other aqueous solutions, such as salt solutions, cell growth media, and human blood serum, the particles move more slowly.
Wang cautions that applications, such as drug delivery, are a long way off. One of the hurdles he must leap is that his motors don’t last long because the reaction isn’t catalytic. As the aluminum reacts with water, the particles dissolve after about a minute. In salt solutions, the slower reaction increases the lifetime to almost five minutes. Wang says his team is investigating other alloys and reactions that could last longer.
Other materials and alloys might solve another problem: toxicity. As the water-fueled particles break down, they release aluminum and gallium, which could harm cells. Zinc is a less toxic motor material. Wang and his colleagues recently reported motors made with zinc that use acid as fuel (J. Am. Chem. Soc., DOI: 10.1021/ja210874s).
Despite their limitations, the water-fueled motors tackle a major problem bioengineers have been struggling to solve, says Samuel Sanchez of the Leibniz Institute for Solid State and Materials Research, in Dresden, Germany. He thinks researchers could use the motors in biosensor devices that require transporting DNA or cells.
Chemical & Engineering News
ISSN 0009-2347
Copyright © 2012 American Chemical Society
Fuente: C&EN
No hay comentarios:
Publicar un comentario
Bienvenido a Avibert.
Deja habilitado el acceso a tu perfil o indica un enlace a tu blog o sitio, para que la comunicación sea mas fluida.
Saludos y gracias por comentar!